Description
Activator for cyanoacrylate adhesive, bonds in seconds!!
To accelerate the curing of superglues
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Application
The activator accelerates the curing of superglues and should always be used where adhesion must occur within seconds or if inactive materials (e.g. metals) or excessive gaps are present. Adhesive surpluses can also be fully cured by subsequent spraying.
The activator can be applied to the respective cleaned surface using a small sponge, brush, or by immersing or spraying. Apply the activator on one side, at least 2 minutes before the adhesive. The activator must evaporate completely before the parts are joined!
The adhesive is always applied to the untreated surface. No more than 10 minutes should elapse between applying the activator and the adhesive.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.